The One-Sided Operator Exponential on the N-Regular Sector
Introduction
This article computes the one-parameter group generated by a one-sided operator on the N-regular sector and the exponent that one spinor slot carries. The sector is the group of invertibles $N\neq0$; the algebra of the operator — the composition laws, the factorisation through the complete polar decomposition, the eigenbasis, the block form, the image and the kernel — is in One-Sided Operators on the N-Regular Sector, and this article uses it without repeating it.
A one-sided operator is a representation of the algebra, so its exponential is the exponential of the element:
$$ \exp\bigl(tL_{\tilde Q}\bigr)=L_{\exp(t\tilde Q)},\qquad \exp\bigl(tR_{\tilde Q}\bigr)=R_{\exp(t\tilde Q)} . $$
That identity holds on the whole sector. It is the reason the one-sided reading is the natural home of the spinor exponent: a spinor is acted on by one slot, the exponent of the slot is half of the exponent of the vector action, and the group generated by $L_{\tilde Q}$ displays the half in its spectrum.
What the norm decides, and what the vector form decides. The identity above fixes the exponential from the element on the whole sector, so the norm decides nothing new here: invertibility, the rate and the group law are the same at every point of the sector. The wall $B^{2}=0$ decides only the shape of the one-parameter group. Off the wall the operator is diagonalisable and the group is a torus of rotations and boosts, with the eigenvalues $e^{t\lambda_\pm}$. On the wall the operator is $Q_t(I+L_{\vec\Upsilon})$ with $L_{\vec\Upsilon}^{2}=0$, the group is a line of shears, and the exponential truncates at degree one. On the wall the two polar factors survive, but their exponents are locked to the single null parameter $a$: the axes are orthogonal and $\varepsilon\tan\frac{\theta_{\mathrm{axr}}}{2}=\sinh\frac{\theta_{\mathrm{rpd}}}{2}=a$.
The plan is the following. §The Operator Exponential proves the identity and reads the spectrum and the rate. §The Polar Word on a Spinor proves the half-spin theorem. §The Weight Relation and the Two Copies reads the weights of $S\otimes S^{*}$. §The Exponents of the Four Factors collects the exponents in one table. §The Wall $B^{2}=0$ computes the shear and the locked angles. The article closes with the summary, the notation and the readings.
The Operator Exponential
Theorem. For every $\tilde Q\in\mathbb{B}$ and every $t\in\mathbb{C}$,
$$ \boxed{\;\exp\bigl(tL_{\tilde Q}\bigr)=L_{\exp(t\tilde Q)},\qquad \exp\bigl(tR_{\tilde Q}\bigr)=R_{\exp(t\tilde Q)}\;} $$
Proof. The left multiplication is multiplicative, $L_{\tilde Q}^{n}=L_{\tilde Q^{n}}$, so the exponential series is
$$ \exp\bigl(tL_{\tilde Q}\bigr) =\sum_{n\ge0}\frac{t^{n}}{n!}L_{\tilde Q}^{n} =\sum_{n\ge0}L_{t^{n}\tilde Q^{n}/n!} =L_{\exp(t\tilde Q)} . $$
The same computation holds on the right, because $R_{\tilde Q}^{n}=R_{\tilde Q^{n}}$; the right multiplication is an anti-representation, but a single element commutes with its own powers.
On $\Sigma_{11}$ the operator is diagonalisable, with the eigenvalues $\lambda_+,\lambda_+,\lambda_-,\lambda_-$ of §The Eigenbasis and the Two Spinor Spaces of the companion. Hence $\exp(tL_{\tilde Q})$ is diagonalisable, with the eigenvalues
$$ e^{t\lambda_+},\ e^{t\lambda_+},\ e^{t\lambda_-},\ e^{t\lambda_-}, \qquad \lambda_\pm=Q_t\pm iB . $$
Its determinant and trace are
$$ \det\exp\bigl(tL_{\tilde Q}\bigr)=\exp\bigl(4tQ_t\bigr), \qquad \operatorname{tr}\exp\bigl(tL_{\tilde Q}\bigr) =2\bigl(e^{t\lambda_+}+e^{t\lambda_-}\bigr) =4e^{tQ_t}\cos(tB). $$
The rate is the eigenvalue itself, not its square. For a central element $\tilde Q=c\,e_t$ the operator is $c\,\mathrm{id}$ and the group is $e^{tc}\,\mathrm{id}$; the two-sided companion has $e^{t\lvert c\rvert^{2}}\,\mathrm{id}$. The one-sided rate is $c$, the two-sided rate is $\lvert c\rvert^{2}$.
The Polar Word on a Spinor
Write the polar word as $$ \tilde Q=\varrho\,e^{i\theta_{\mathrm{pha}}}\,\tilde U_{\mathrm b}\,\tilde u_{\mathrm r}, \qquad \varrho\exp(i\alpha), $$ and put $$ \lambda_\pm=\varrho\,e^{i\theta_{\mathrm{pha}}}\,\mu_\pm,\qquad \mu_+\mu_-=1 . $$ The numbers $\mu_\pm$ are the eigenvalues of the unit factor $\tilde U_{\mathrm b}\tilde u_{\mathrm r}$. On either spinor space the operator multiplies the first coordinate by $\lambda_+$ and the second by $\lambda_-$, so the spinor coordinates carry the pair $(\lambda_+,\lambda_-)$.
For each pure factor, read with the other factors absent, the pair is elementary. The scale $\varrho$ gives $\mu_+=\mu_-=1$. The central phase $\exp(i\alpha)$ gives $\mu_+=\mu_-=1$ and multiplies both coordinates by $\exp(i\alpha)$. The boost gives $$ \tilde U_{\mathrm b}=\exp\Bigl(i\tfrac{\theta_{\mathrm{rpd}}}{2}\vec u_{\mathrm b}\Bigr) \quad\Longrightarrow\quad \mu_+=e^{-\theta_{\mathrm{rpd}}/2},\qquad \mu_-=e^{\theta_{\mathrm{rpd}}/2}, $$ and the rotor gives $$ \tilde u_{\mathrm r}=\exp\Bigl(\tfrac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r}\Bigr) \quad\Longrightarrow\quad \mu_+=e^{i\theta_{\mathrm{axr}}/2},\qquad \mu_-=e^{-i\theta_{\mathrm{axr}}/2}. $$ Theorem (the one-sided operator is the spinor action). The one-sided operator produces the half-angle and the half-rapidity; the two-sided operator produces the full angle and the full rapidity. The rotor case is $$ \boxed{\; L_{\tilde u_{\mathrm r}}=\exp\Bigl(\tfrac{\theta_{\mathrm{axr}}}{2}\,L_{\vec u_{\mathrm r}}\Bigr) \ \Longrightarrow\ (\alpha,\beta)\longmapsto(e^{i\theta_{\mathrm{axr}}/2}\alpha,\ e^{-i\theta_{\mathrm{axr}}/2}\beta), \qquad \mathrm{Sd}_{\tilde u_{\mathrm r}}=\exp\Bigl(\tfrac{\theta_{\mathrm{axr}}}{2}\,\mathrm{ad}_{\vec u_{\mathrm r}}\Bigr) \ \Longrightarrow\ \vec v\longmapsto R_{\vec u_{\mathrm r}}(\theta_{\mathrm{axr}})\vec v \; }. $$ The exponent is $\tfrac{\theta_{\mathrm{axr}}}{2}$ in both readings. The exponent $\tfrac{\theta_{\mathrm{axr}}}{2}$ of $L_{\tilde u_{\mathrm r}}$ multiplies the two spinor coordinates by $e^{i\theta_{\mathrm{axr}}/2}$ and $e^{-i\theta_{\mathrm{axr}}/2}$, hence the output is the half-angle; the same $\tfrac{\theta_{\mathrm{axr}}}{2}$ in $\mathrm{ad}_{\vec u}(X)=[\vec u,X]$ gives the rotation of angle $\theta_{\mathrm{axr}}$, because $\mathrm{ad}_{\vec u}=2\,[\vec u\times]$ and the factor $2$ doubles it. The boost is the same: $$ \boxed{\; L_{\tilde U_{\mathrm b}}=\exp\Bigl(i\tfrac{\theta_{\mathrm{rpd}}}{2}\,L_{\vec u_{\mathrm b}}\Bigr) \ \Longrightarrow\ (\alpha,\beta)\longmapsto(e^{-\theta_{\mathrm{rpd}}/2}\alpha,\ e^{\theta_{\mathrm{rpd}}/2}\beta), \qquad \mathrm{Sd}_{\tilde U_{\mathrm b}}\ \Longrightarrow\ \text{rapidity }\theta_{\mathrm{rpd}} \; }. $$ A spinor transforms by half of what a vector transforms by, and the operator that produces the half is the one-sided one. This is the precise sense in which the spin representation of the polar word is the one-sided operator, and the vector representation is the two-sided one. The spectral form of the same statement is in §The Spectrum of the Two-Sided Operator of Two-Sided Operators on the N-Regular Sector and §The Pure Factors and the Full Spin of The Two-Sided Exponential on the N-Regular Sector.
The following table collects the pure factors. The last column is the nontrivial factor in the spectrum of the two-sided operator, that is, in the products $\lambda_i\bar\lambda_j$.
| factor | $\mu_+,\mu_-$ | spinor matrix $\Delta$ | exponent per coordinate | nontrivial two-sided factor |
|---|---|---|---|---|
| scale $\varrho$ | $1,1$ | $rI_2$ | $\ln \varrho$ | $\varrho^{2}$ |
| phase $\exp(i\alpha)$ | $1,1$ | $\exp(i\alpha)I_2$ | $i\alpha$ | $1$ |
| boost $\tilde U_{\mathrm b}$ | $e^{-\theta_{\mathrm{rpd}}/2},e^{\theta_{\mathrm{rpd}}/2}$ | $\operatorname{diag}(e^{-\theta_{\mathrm{rpd}}/2},e^{\theta_{\mathrm{rpd}}/2})$ | $\mp\theta_{\mathrm{rpd}}/2$ | $e^{\pm\theta_{\mathrm{rpd}}}$ |
| rotor $\tilde u_{\mathrm r}$ | $e^{i\theta_{\mathrm{axr}}/2},e^{-i\theta_{\mathrm{axr}}/2}$ | $\operatorname{diag}(e^{i\theta_{\mathrm{axr}}/2},e^{-i\theta_{\mathrm{axr}}/2})$ | $\pm i\theta_{\mathrm{axr}}/2$ | $e^{\pm i\theta_{\mathrm{axr}}}$ |
The scale and the phase are central. Their rows are read as scalar multipliers of a word with $B\neq0$; for a purely central element $B=0$, every basis is an eigenbasis, and the single eigenvalue is $Q_t$.
For a general word the two factors do not commute, and $\mu_\pm$ are not separately exponentials of half the boost and half the rotor angle. The spinor matrix is still $\Delta=\operatorname{diag}(\lambda_+,\lambda_-)$; the half-angle formulas are the statement for the pure factors, and for commuting axes. The general relation between the spectral data and the polar angles is Relations between the Complete Polar Decomposition and Eigenbasis of an N-Regular Biquaternion, §The Spectral Data from the Polar Factors.
The Weight Relation and the Two Copies
The algebra is the tensor product of a spinor space and its dual, $$ \mathbb{B}\cong S\otimes S^{*}, $$ where $S=\mathbb{C}^{2}$ is the spinor space and $S^{*}$ its dual, and $S_+\cong S_-\cong S$ as left modules. Left multiplication acts on the first factor, right multiplication on the second: $$ L_{\tilde Q}=\Delta_{\mathrm{rep}}(\tilde Q)\otimes 1, \qquad R_{\tilde Q}=1\otimes\Delta_{\mathrm{rep}}(\tilde Q)^{T}, \qquad R_{\tilde Q^{*}}=1\otimes\bar\Delta_{\mathrm{rep}}(\tilde Q), $$ where $\Delta_{\mathrm{rep}}$ is the defining representation on $S$ and $\bar\Delta_{\mathrm{rep}}$ its conjugate. The two factors commute, so the exponents add: $$ \exp\bigl(tL_A\bigr)\exp\bigl(sR_B\bigr)=\exp\bigl(tL_A+sR_B\bigr). $$
For the rotor, $\Delta_{\mathrm{rep}}(\tilde u_{\mathrm r})$ has weights $e^{\pm i\theta_{\mathrm{axr}}/2}$ and $\bar\Delta_{\mathrm{rep}}(\tilde u_{\mathrm r})$ has weights $e^{\mp i\theta_{\mathrm{axr}}/2}$. The tensor weights, in additive notation, are the four sums $$ \tfrac{\theta_{\mathrm{axr}}}{2}-\tfrac{\theta_{\mathrm{axr}}}{2}=0,\qquad \tfrac{\theta_{\mathrm{axr}}}{2}+\tfrac{\theta_{\mathrm{axr}}}{2}=\theta_{\mathrm{axr}},\qquad -\tfrac{\theta_{\mathrm{axr}}}{2}-\tfrac{\theta_{\mathrm{axr}}}{2}=-\theta_{\mathrm{axr}},\qquad -\tfrac{\theta_{\mathrm{axr}}}{2}+\tfrac{\theta_{\mathrm{axr}}}{2}=0, $$ that is $(\theta_{\mathrm{axr}},0,0,-\theta_{\mathrm{axr}})$. For the boost, both slots carry $e^{\mp\theta_{\mathrm{rpd}}/2}$ because the boost is Hermitian, and the sums are $(\theta_{\mathrm{rpd}},0,0,-\theta_{\mathrm{rpd}})$. These are the weights of the vector. The invariant statement is that the weights of $S\otimes S^{*}$ are the pairwise sums of the weights of $S$ and $S^{*}$; the factor two sits in the pairing, not in a rescaling of the angle.
"Half" is relative. The angle $\theta_{\mathrm{axr}}$ is defined by the vector action, as the rotation of $\mathbb{R}^{3}$. The spinor weight is $\theta_{\mathrm{axr}}/2$ because the rotor is $\exp(\tfrac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r})$. A different normalisation of the angle would change the number and not the relation.
The whole operator is two copies. On $\mathbb{B}=S_+\oplus S_-$ the two summands are isomorphic as left modules, so $$ \operatorname{spec}L_{\tilde u_{\mathrm r}}=\{e^{i\theta_{\mathrm{axr}}/2},e^{i\theta_{\mathrm{axr}}/2},e^{-i\theta_{\mathrm{axr}}/2},e^{-i\theta_{\mathrm{axr}}/2}\}, $$ each weight twice. The one-sided operator is $2\Delta_{\mathrm{rep}}$ as a left module: two copies of the Weyl module, not the Dirac module $\Delta_{\mathrm{rep}}\oplus\bar\Delta_{\mathrm{rep}}$. One Peirce column is one elementary spinor, a Weyl spinor in the language of physics; the whole of $L$ is a pair of them, which is a Dirac spinor (Spinors and Dirac Spinors in the Biquaternion Algebra, §The Pair Is a Multiplicity). The precise phrase is therefore: the one-sided operator, restricted to one Peirce component, is the half-spin.
The two Peirce copies are not the two Lorentz chiralities. Both $S_+$ and $S_-$ carry the same representation $\Delta_{\mathrm{rep}}$; they differ by the Peirce idempotent, not by the Lorentz chirality. The two Lorentz chiralities are the two tensor factors $S$ and $S^{*}$, that is the left and right slots.
Factor by factor. For a general word the factors do not commute and $\lambda_\pm$ are not $e^{\pm i\theta_{\mathrm{axr}}/2}$ or $e^{\mp\theta_{\mathrm{rpd}}/2}$. There is no single half-angle of a general polar word; the additive relation is the statement for the pure factors and for commuting axes.
The whole of $L$ is twisted. $L_{\tilde Q}$ also carries the scale $\varrho$ and the phase $e^{i\alpha}$. The spinor statement concerns the norm-one, phase-one part $\tilde U_{\mathrm b}\tilde u_{\mathrm r}$; the full operator is the twisted spinor representation of the module.
The double cover. Replacing $\tilde u_{\mathrm r}$ by $-\tilde u_{\mathrm r}$ leaves the two-sided operator unchanged and changes $L$ by $-1$. On the norm-one slice the two-sided operator determines the element only up to sign; $L$ distinguishes the sign. The half-angle is therefore defined only after the lift to the double cover is chosen, and $L$ is the operator that carries the choice.
Corollary (the one-sided operator is the spinor action). The operator $L_{\tilde Q}$ is the action of $\tilde Q$ on a single spinor. It preserves chirality, acts by the same $\Delta$ on $S_+$ and $S_-$, and its rotor and boost exponents are half those of the two-sided operator.
The Exponents of the Four Factors
The following table collects the exponents. The exponent is the element $A$ such that the factor is $\exp(A)$; the scalar parameter is the real or imaginary coefficient inside that exponential, and the two-sided output is the parameter of the corresponding transformation in the two-sided operator.
| factor | exponent $A$ | scalar parameter | two-sided output |
|---|---|---|---|
| scale $\varrho$ | $\ln \varrho$ | $\ln \varrho$ | $2\ln \varrho$ |
| phase $\exp(i\alpha)$ | $i\alpha$ | $\alpha$ | $0$ |
| boost $\tilde U_{\mathrm b}$ | $i\tfrac{\theta_{\mathrm{rpd}}}{2}\vec u_{\mathrm b}$ | $\tfrac{\theta_{\mathrm{rpd}}}{2}$ | $\theta_{\mathrm{rpd}}$ |
| rotor $\tilde u_{\mathrm r}$ | $\tfrac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r}$ | $\tfrac{\theta_{\mathrm{axr}}}{2}$ | $\theta_{\mathrm{axr}}$ |
The rule is the number of slots. A one-sided operator is one factor of the word, so its exponent is the exponent of that factor: the scale keeps $\ln \varrho$, the phase keeps $i\alpha$, the boost keeps the half-rapidity in $i\theta_{\mathrm{rpd}}/2\,\vec u_{\mathrm b}$, the rotor keeps the half-angle in $\theta_{\mathrm{axr}}/2\,\vec u_{\mathrm r}$. A two-sided operator uses two slots, the parameter and its Hermitian conjugate. For the Hermitian factors the two exponents are equal and add, giving $2\ln \varrho$ for the scale and $\theta_{\mathrm{rpd}}$ for the boost; for the $*$-unitary rotor they are opposite and the conjugation gives the angle $\theta_{\mathrm{axr}}$; for the central imaginary phase they cancel to $0$. The doubling of the companion article is therefore a two-slot phenomenon for the scale, the boost and the rotor, and the phase is its exceptional case.
The Wall $B^{2}=0$: the Exponential at the Wall
On the wall the element is $Q_t(e_t+\vec\Upsilon)$ with $\vec\Upsilon^{2}=0$, so the operator is $Q_t(I+L_{\vec\Upsilon})$ and its exponential is a shear. The two polar factors of the element survive, but their two exponents no longer add to the exponent of the element: the log defect is non-zero.
The Exponential at the Wall
One null exponent. On the sector the element is a scalar times a unipotent element, so its exponential is polynomial. Since $\vec\Upsilon^2=0$,
$$ \boxed{\;\tilde Q=Q_t\bigl(e_t+\vec\Upsilon\bigr)=\varrho e^{i\theta_{\mathrm{pha}}}\varepsilon\,e^{\vec\Upsilon},\qquad e^{\vec\Upsilon}=e_t+\vec\Upsilon,\qquad \varepsilon=\frac{Q_t}{\varrho\,e^{i\theta_{\mathrm{pha}}}}=\pm1.\;} $$
Write $\vec\Upsilon=\vec A+i\vec B$ with $\vec A$ and $\vec B$ real; then $\vec A\cdot\vec B=0$ and $\lvert\vec A\rvert=\lvert\vec B\rvert=a$. The regular word carries two independent exponents, $i\frac{\theta_{\mathrm{rpd}}}{2}\vec u_{\mathrm b}$ and $\frac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r}$, about two independent axes. At the wall both factors remain, but their exponents do not add. The formal exponent $i\frac{\theta_{\mathrm{rpd}}}{2}\vec u_{\mathrm b}+\frac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r}$ is not the logarithm: its difference from the true exponent $\vec\Upsilon$ is the log defect of The Complete Polar Decomposition of an N-Regular Biquaternion, §The Formal Exponent and the Defect at the Wall, whose cross term $i\varepsilon\tanh\frac{\theta_{\mathrm{rpd}}}{2}\tan\frac{\theta_{\mathrm{axr}}}{2}\,\vec u_{\mathrm b}\times\vec u_{\mathrm r}$ is non-zero because the axes are orthogonal. The exact exponent is $\vec\Upsilon$ itself. What the wall leaves is a pair of constraints between the two factors:
$$ \boxed{\;\vec u_{\mathrm b}\cdot\vec u_{\mathrm r}=0,\qquad \varepsilon\tan\frac{\theta_{\mathrm{axr}}}{2}=\sinh\frac{\theta_{\mathrm{rpd}}}{2}=a.\;} $$
Proof. From the coordinate boxes of The Complete Polar Decomposition of an N-Regular Biquaternion, $\cosh\frac{\theta_{\mathrm{rpd}}}{2}=\sqrt{1+a^2}$, $\sinh\frac{\theta_{\mathrm{rpd}}}{2}=a$, $\lvert\cos\frac{\theta_{\mathrm{axr}}}{2}\rvert=1/\sqrt{1+a^2}$ and $\sin\frac{\theta_{\mathrm{axr}}}{2}=a/\sqrt{1+a^2}$. Hence $\varepsilon\tan\frac{\theta_{\mathrm{axr}}}{2}=a=\sinh\frac{\theta_{\mathrm{rpd}}}{2}$. The axes are $\vec u_{\mathrm b}\propto\vec B+\vec A\times\vec B$ and $\vec u_{\mathrm r}=\varepsilon\vec A/a$. The vectors $\vec B$ and $\vec A\times\vec B$ are both orthogonal to $\vec A$, because $\vec A\cdot\vec B=0$, so $\vec u_{\mathrm b}\cdot\vec u_{\mathrm r}=0$.
The wall therefore removes neither factor. It removes two real degrees of freedom: the rapidity and the angle are locked to the single parameter $a$, and the two axes are forced orthogonal. The product of the two factors is the unipotent $\tilde U$, up to the sign $\varepsilon$.
The operator exponential. Left multiplication is a representation, $L_{\tilde X}L_{\tilde Y}=L_{\tilde X\tilde Y}$, hence $L_{\exp\tilde X}=\exp L_{\tilde X}$. Since $L_{\vec\Upsilon}^2=L_{\vec\Upsilon^2}=0$,
$$ \boxed{\;\exp\bigl(tL_{\tilde Q}\bigr) =\exp\bigl(tQ_t(I+L_{\vec\Upsilon})\bigr) =e^{tQ_t}\bigl(I+tQ_tL_{\vec\Upsilon}\bigr)\;} $$
for every complex $t$. In particular $\exp L_{\tilde Q}=e^{Q_t}(I+Q_tL_{\vec\Upsilon})$.
Proof. $L_{\tilde Q}=Q_tL_{e_t+\vec\Upsilon}=Q_t(I+L_{\vec\Upsilon})$ and $L_{\vec\Upsilon}^2=0$. The two terms of the exponent commute, because both are polynomials in $L_{\vec\Upsilon}$, so the exponential is $e^{tQ_t}\exp(tQ_tL_{\vec\Upsilon})$, and the second factor is $I+tQ_tL_{\vec\Upsilon}$.
Interpretation. The one-parameter group is a line of shears, not a circle of rotations. The exponential moves the identity along the nilpotent direction and stops at degree one; it has no period and carries no angle. The polar angles are in the factors: $L_{\tilde U_{\mathrm b}}$ has the eigenvalues $e^{\pm\theta_{\mathrm{rpd}}/2}$, each twice, and $L_{\tilde u_{\mathrm r}}$ has $e^{\pm i\theta_{\mathrm{axr}}/2}$, each twice. Their product has the single eigenvalue $Q_t$, with two Jordan blocks of size two, and its spectrum carries no angle at all. In the regular sector the eigenvalues of $L_{\tilde Q}$ are $\varrho\,e^{i\theta_{\mathrm{pha}}}\mu_\pm$ with $\mu_\pm=U_t\pm i\sqrt{1-U_t^2}$ and $U_t=\operatorname{Sc}\tilde U$; at the wall $U_t\to\varepsilon$ and both eigenvalues tend to $\varrho\,e^{i\theta_{\mathrm{pha}}}\varepsilon=Q_t$. The only trace of the two angles is the single parameter $a$ that measures the nilpotent part.
At the wall the spinor exponent is $\vec\Upsilon$ itself, carried by the left slot. The vector exponent of the two-sided operator is $\vec\Upsilon$ in the left slot plus $\vec\Upsilon^{*}$ in the right. That is the wall form of the doubling: the spinor reading has one slot, the vector reading has two, and the scalar part appears once per slot. This is why the modulus is $Q_t$ in the one-sided reading and $\lvert Q_t\rvert^2$ in the two-sided one, and not a doubled exponent.
Worked Example on the Wall
The companion gives the operator and its nilpotent part in the basis $(e_t,\vec e_x,\vec e_y,\vec e_z)$. Its exponential is the shear
$$ \exp\bigl(tL_{\tilde Q}\bigr)=e^{t}\bigl(I+t\,\mathsf M(L_{\vec\Upsilon})\bigr) =e^{t} \begin{pmatrix} 1&-t&-it&0\\ t&1&0&it\\ it&0&1&-t\\ 0&-it&t&1 \end{pmatrix}, $$
which is the identity plus $t$ times the nilpotent matrix above, multiplied by $e^{t}$. At $t=1$ it is $e$ times the unipotent matrix of the operator, as the box requires.
The example displays the general form: $\exp(tL_{\tilde Q})=e^{tQ_t}(I+tQ_tL_{\vec\Upsilon})$ with $Q_t=1$ and $\mathsf M(L_{\vec\Upsilon})$ the nilpotent matrix above.
Summary
The one-sided exponential is the element exponential in the regular representation:
$$ \exp\bigl(tL_{\tilde Q}\bigr)=L_{\exp(t\tilde Q)}, \qquad \exp\bigl(tR_{\tilde Q}\bigr)=R_{\exp(t\tilde Q)} . $$
On $\Sigma_{11}$ it is diagonalisable, with the eigenvalues $e^{t\lambda_\pm}$, each twice, where $\lambda_\pm=Q_t\pm iB$; its determinant is $\exp(4tQ_t)$ and its trace is $4e^{tQ_t}\cos(tB)$. The one-sided rate is the eigenvalue $\lambda_\pm$, not its square.
The one-sided operator is the spinor action. On one Peirce column the operator is the Weyl spinor $\Delta=\operatorname{diag}(\lambda_+,\lambda_-)$; the rotor carries $e^{\pm i\theta_{\mathrm{axr}}/2}$ and the boost $e^{\mp\theta_{\mathrm{rpd}}/2}$, so the slot carries the half-angle and the half-rapidity. The whole of $L$ is two copies of that spinor, one per Peirce column, and the two Lorentz chiralities are the two tensor slots of $\mathbb{B}\cong S\otimes S^{*}$, not the two Peirce columns.
The weights add on the tensor product. For the rotor they are $(\theta_{\mathrm{axr}},0,0,-\theta_{\mathrm{axr}})$ and for the boost $(\theta_{\mathrm{rpd}},0,0,-\theta_{\mathrm{rpd}})$; the factor two sits in the pairing of the two slots, not in a rescaling of the angle. The one-sided operator sees one slot and does not double.
On the wall the operator is $Q_t(I+L_{\vec\Upsilon})$ with $L_{\vec\Upsilon}^{2}=0$, so the group is the shear $\exp(tL_{\tilde Q})=e^{tQ_t}(I+tQ_tL_{\vec\Upsilon})$, with no period and no angle. Each eigenvalue $e^{tQ_t}$ carries a Jordan block of size two. The polar factors keep their eigenvalues $e^{\pm\theta_{\mathrm{rpd}}/2}$ and $e^{\pm i\theta_{\mathrm{axr}}/2}$, each twice, but their parameters are locked: $\vec u_{\mathrm b}\cdot\vec u_{\mathrm r}=0$ and $\varepsilon\tan\frac{\theta_{\mathrm{axr}}}{2}=\sinh\frac{\theta_{\mathrm{rpd}}}{2}=a$. The two angles leave the single trace $a$ in the spectrum.
The four factors give the table of exponents. The scale keeps $\ln \varrho$, the phase keeps $i\alpha$, the boost keeps $i\tfrac{\theta_{\mathrm{rpd}}}{2}\vec u_{\mathrm b}$ and the rotor keeps $\tfrac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r}$. The two-sided output is $2\ln \varrho$, $0$, $\theta_{\mathrm{rpd}}$ and $\theta_{\mathrm{axr}}$; the doubling and the cancellation are the subject of The Two-Sided Exponential on the N-Regular Sector.
Summary of Notation
| Symbol | Meaning |
|---|---|
| $L_{\tilde Q},R_{\tilde Q}$ | the left and right multiplications |
| $\lambda_\pm=Q_t\pm iB$, $B^{2}=Q_x^{2}+Q_y^{2}+Q_z^{2}$ | the two eigenvalues of $L_{\tilde Q}$ |
| $\varrho\exp(i\alpha)$ | the complex modulus |
| $\mu_\pm=\lambda_\pm/(\varrho\,e^{i\theta_{\mathrm{pha}}})$ | the eigenvalues of the unit factor |
| $\Delta=\operatorname{diag}(\lambda_+,\lambda_-)$ | the spinor matrix on either Peirce column |
| $S_+=\mathbb{B}\tilde\Pi_+$, $S_-=\mathbb{B}\tilde\Pi_-$ | the two Peirce spinor spaces |
| $S,S^{*}$ | the spinor space $\mathbb{C}^{2}$ and its dual, $\mathbb{B}\cong S\otimes S^{*}$ |
| $\Delta_{\mathrm{rep}},\bar\Delta_{\mathrm{rep}}$ | the defining representation and its conjugate |
| $\tilde U_{\mathrm b}=\exp(i\tfrac{\theta_{\mathrm{rpd}}}{2}\vec u_{\mathrm b})$ | the boost |
| $\tilde u_{\mathrm r}=\exp(\tfrac{\theta_{\mathrm{axr}}}{2}\vec u_{\mathrm r})$ | the rotor |
| $\theta_{\mathrm{rpd}},\theta_{\mathrm{axr}}$ | the rapidity and the rotation angle |
| $\vec\Upsilon=\vec A+i\vec B$ | the null vector on the wall, $\lvert\vec A\rvert=\lvert\vec B\rvert=a$, $\vec A\cdot\vec B=0$ | | $L_{\vec\Upsilon}$ | the left multiplication by the null vector, $L_{\vec\Upsilon}^{2}=0$ | | $a$ | the null parameter, $\varepsilon\tan\frac{\theta_{\mathrm{axr}}}{2}=\sinh\frac{\theta_{\mathrm{rpd}}}{2}=a$ |
Further Reading
- One-Sided Operators on the N-Regular Sector, for the algebraic companion: the composition laws, the eigenbasis, the block form, the wall and the image.
- The Two-Sided Exponential on the N-Regular Sector, for the doubling rule and the cancellation of the phase on the other side.
- The Complete Polar Decomposition of an N-Regular Biquaternion, for the element exponential, its logarithm, its spectral reading and the log defect used at the wall (§The Formal Exponent and the Defect at the Wall).
- Relations between the Complete Polar Decomposition and Eigenbasis of an N-Regular Biquaternion, for the general dictionary between the spectral data and the polar angles.