The Fubini–Study Geometry and the Biquaternion Norm

Introduction

The state space of the qubit is a ball, and the geometry of its boundary is the Fubini–Study geometry of the projective line $\mathbb{P}^1(\mathbb{C})$. The companion articles established the ball as the normalised slice of the future light cone of the biquaternion norm of the biquaternion algebra $\mathbb{B} = \mathbb{C}\otimes_\mathbb{R}\mathbb{H}$, with the pure states on the boundary and the mixed states in the interior. The present article establishes the metric geometry of that slice: the Fubini–Study metric on the pure states and its standard Bures extension to the mixed states are read off from the two forms the algebra already supplies, the biquaternion norm and the plain form.

The result is a division of labour between the two forms, and it is worth stating before any algebra is written.

  • The Hermitian form (the plain form on $\mathbb{B}_{\Psi}$) fixes the transition probability. On pure states the normalised form gives $2\langle\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\rangle_{*} = \tfrac12(1+\vec{u}_1\cdot\vec{u}_2) = \cos^2(\theta/2)$, the squared overlap of the corresponding rays.
  • The biquaternion norm fixes the metric. It vanishes identically on the pure states, so it cannot itself be a metric there; what it gives is the line element at second order, and the result is

$$ ds^2_{\mathrm{FS}} \;=\; -\,\langle\delta\tilde\Pi\rangle_{\natural}\Big|_{\text{tangential}} \;=\; \tfrac14\,\bigl|d\vec{u}\bigr|^2 \;=\; \tfrac14\left(d\theta^2+\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2\right), $$

the Fubini–Study line element of $\mathbb{P}^1(\mathbb{C})$, equal to one quarter of the round metric of the Bloch sphere. The factor $\tfrac14$ is the spinorial factor: it is the square of the ratio between the angle on the ray space and the angle on the Bloch sphere, that ratio being the half-angle $\tfrac12$ of the double cover $SU(2)\to SO(3)$.

Three further results complete the picture. The Fubini–Study metric is Kähler: its complex structure is the central scalar imaginary $i$ acting on the state module, and its symplectic form is, up to a factor, the scalar part of the algebra commutator, $$ \omega \;=\; -\,i\,\mathrm{Sc}\!\left(\tilde\Pi\,[\delta_1\tilde\Pi,\delta_2\tilde\Pi]\right) \;=\; \tfrac14\,\vec{u}\cdot(\delta_1\vec{u}\times\delta_2\vec{u}). $$ The geodesic distance is $d_{\mathrm{FS}}(\tilde\Pi_1,\tilde\Pi_2) = \arccos\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle\rvert = \theta/2$, so that the trace distance of the companion article Exercise: The Bloch Ball and the Geometry of Mixed States is the sine of the Fubini–Study distance, $D = \sin d_{\mathrm{FS}}$. And on the interior the metric is the Bures metric, whose boundary restriction is the Fubini–Study metric; the flat quadratic form $-\tfrac14|d\vec s_{\Psi}|^2$ that the biquaternion norm also supplies is not that interior metric, so the biquaternion norm gives the boundary exactly and the flat geometry everywhere, but not the metrically distinguished interior.

The article proceeds as follows. The state space and its two forms are recalled; the pure states are identified with the rays of the state module and with the points of $\mathbb{P}^1(\mathbb{C})$; the transition probability is computed from the normalised Hermitian form; the Fubini–Study line element is computed from the biquaternion norm in two independent ways, from the Hermitian idempotent displacement and from the spinor, and the two agree; the complex structure and the Kähler form are exhibited; geodesics and distances are collected; and the Bures extension and the limits of the algebra's own contribution are stated. What the article does not do is the informational interpretation of the same geometry, which belongs to the informational articles, and the spin-specific interpretations, which belong to the spin articles.

The State Space and Its Two Forms

An element of the Hermitian subspace is $\tilde H_\Psi=h_t\,e_t+i\vec h_\Psi$ with $h_t\in\mathbb{R}$ and $\vec h_\Psi\in\mathbb{R}^3$, and the state space is the normalised hyperplane of the future cone, $$ \{\text{states}\}=\left\{\tilde{Ϛ}_{\Psi}\in\mathbb{B}_{\Psi}:\ \langle\tilde{Ϛ}_{\Psi},e_t\rangle_{*}=\tfrac12,\ \langle\tilde{Ϛ}_{\Psi}\rangle_{\natural}\geq0\right\}, \qquad \tilde{Ϛ}_{\Psi}=\tfrac12(e_t+i\vec s_{\Psi}),\quad |\vec s_{\Psi}|\leq1 , $$

Two symmetric forms live on the same four-dimensional real space, and the whole geometry of this article rests on keeping them apart.

The plain form. For two Hermitian elements $\tilde{H}_{\Psi,1}=h_{t,1}\,e_t+i\vec h_{\Psi,1}$ and $\tilde{H}_{\Psi,2}=h_{t,2}\,e_t+i\vec h_{\Psi,2}$, $$ \langle\tilde{H}_{\Psi,1},\tilde{H}_{\Psi,2}\rangle_{*}=\mathrm{Sc}\bigl(\tilde{H}_{\Psi,1}\tilde{H}_{\Psi,2}^{*}\bigr)=h_{t,1}h_{t,2}+\vec h_{\Psi,1}\cdot\vec h_{\Psi,2} $$ is positive definite, of inertia $(4,0)$, the Euclidean pairing on $\mathbb{R}^4$, and it is the Hilbert–Schmidt pairing of the matrix model up to the dimension: $\operatorname{tr}\bigl(M(\tilde{H}_{\Psi,1})M(\tilde{H}_{\Psi,2})\bigr)=2\langle\tilde{H}_{\Psi,1},\tilde{H}_{\Psi,2}\rangle_{*}$.

The biquaternion norm and its polarization. $$ \langle\tilde{H}_{\Psi,1}\rangle_{\natural} = \langle\tilde{H}_{\Psi,1},\tilde{H}_{\Psi,1}\rangle_{\natural}=\tilde{H}_{\Psi,1}\tilde{H}_{\Psi,1}^{\natural}=\bigl(h_{t,1}^2-|\vec h_{\Psi,1}|^2\bigr)e_t, \qquad \langle\tilde{H}_{\Psi,1},\tilde{H}_{\Psi,2}\rangle_{\natural}=\tfrac12\bigl(\tilde{H}_{\Psi,1}\tilde{H}_{\Psi,2}^{\natural}+\tilde{H}_{\Psi,2}\tilde{H}_{\Psi,1}^{\natural}\bigr)=\bigl(h_{t,1}h_{t,2}-\vec h_{\Psi,1}\cdot\vec h_{\Psi,2}\bigr)e_t, $$ is indefinite, of inertia $(1,3)$; its future cone is the positivity cone of the states, and its boundary is the pure states.

The two forms are the two ingredients of the geometry. The Hermitian form is positive definite and therefore measures overlap; the biquaternion norm is indefinite, vanishes on the pure states, and therefore cannot measure length on them directly. The point of the article is that the biquaternion norm nevertheless determines the length, through its second variation on the null boundary. That is a standard feature of a quadratic form at a null direction — the first variation vanishes, and the second variation carries the geometry — and here it is the whole content of the Fubini–Study metric.

The reader should also keep in mind what these forms are not. Neither is the algebra's product; the biquaternion norm is the determinant of the matrix model, $\langle\tilde{Q}\rangle_{\natural}\,e_t=\det M(\tilde{Q})\,e_t$, and the pairing is the matrix trace of the model, $\operatorname{tr}(M(\tilde{H}_{\Psi,1})M(\tilde{H}_{\Psi,2}))=2\langle\tilde{H}_{\Psi,1},\tilde{H}_{\Psi,2}\rangle_{*}$. The geometry below is therefore a statement about the matrix model of the algebra, read through its two canonical functionals, the determinant and the trace.

Pure States and the Projective Line

The boundary of the ball is the sphere $|\vec s_{\Psi}|=1$. On it the biquaternion norm vanishes and the deviation from idempotency vanishes, $$ \langle\tilde{Ϛ}_{\Psi}\rangle_{\natural}=0,\qquad \tilde{Ϛ}_{\Psi}^2-\tilde{Ϛ}_{\Psi}=\tfrac14\bigl(|\vec s_{\Psi}|^2-1\bigr)e_t=0 , $$ so a boundary state is an idempotent with $2\,\mathrm{Sc}=1$ (normalised in the $2\times2$ image) and, in the matrix model, a rank-one projection. Writing it as $$ \tilde\Pi(\vec{u})=\tfrac12\bigl(e_t+i\vec{u}\bigr),\qquad |\vec{u}|=1 , $$ the map $\vec{u}\mapsto\tilde\Pi(\vec{u})$ is a bijection from the unit sphere $S^2=\{\vec{u}\in\mathbb{R}^3\}$ to the pure states, and $\tilde\Pi(\vec{u})$ and $\tilde\Pi(-\vec{u})=e_t-\tilde\Pi(\vec{u})$ are complementary orthogonal projections.

The pure states have a second, independent parametrization, and the agreement of the two is what makes the projective geometry available. The state module is the minimal left ideal $$ \mathbb{B}\tilde\Pi_+=\{\tilde{Ξ}_{1}\,\tilde\Pi_++\tilde{Ξ}_{2}\,r_y:\ \tilde{Ξ}_{1},\tilde{Ξ}_{2}\in\mathbb{C}\}\cong\mathbb{C}^2, \qquad \tilde\Pi_+=\tfrac12(e_t+i\vec e_z), $$

Here $i\vec e_z$ is a root of $+1$, $(i\vec e_z)^2=e_t$, and $\tilde\Pi_+$ and $\tilde\Pi_-$ are its two associated idempotents. and its rays $[\tilde{Ξ}]=\mathbb{C}\tilde{Ξ}$ constitute the projective line $\mathbb{P}^1(\mathbb{C})$. To a nonzero spinor $\tilde{Ξ}$ attach the rank-one element $$ \tilde\Pi_{\mathrm{sp}}=\frac{\tilde{Ξ}\,\tilde{Ξ}^{\dagger}}{2\,\mathrm{Sc}(\tilde{Ξ}^{\dagger}\tilde{Ξ})} . $$ $$ \mathbb{P}^1(\mathbb{C})\ \cong\ S^2\ \cong\ \{\text{pure states}\}, $$ is the standard identification of the projective line with the Bloch sphere. The corresponding spinor is the Bloch spinor of the ray, $$ |\tilde{Ξ}(\theta,\theta_{\mathrm{azm}})\rangle=\cos\tfrac{\theta}{2}\,|0\rangle+\exp(i\theta_{\mathrm{azm}})\sin\tfrac{\theta}{2}\,|1\rangle , $$ and the physical equivalence of $\tilde{Ξ}$ and $\exp(i\theta_{\mathrm{cen}})\tilde{Ξ}$ is the statement that the phase direction is the fiber of the Hopf map $S^3\to S^2$. The central scalar imaginary $i$ supplies that phase: it is central, so left multiplication by $i$ commutes with the left action of $\mathbb{B}$ on the module and gives the module its complex structure. The phase $\mathrm{U}(1)$ is a central subgroup, and the quotient by it is the passage from spinors to rays.

Two remarks fix the roles. First, the complex structure used here lives on the state module $\mathbb{B}\tilde\Pi_+$, not on $\mathbb{B}_{\Psi}$: multiplication by $i$ exchanges the sectors, $i\mathbb{B}_{\Psi}=\mathbb{B}_{\Phi}$, so it is not an operator on the state space. The projective structure is that of the module, and it descends to the boundary of the ball. Second, the pure states are the extreme points of the ball, so the boundary is not merely a convenient subset: it is the set on which the geometry is specified by the algebra's quadratic form rather than by the trace.

The Transition Probability from the Hermitian Form

The Hermitian form gives the overlap of two pure states. From the idempotent form and the quaternion product of pure real quaternions, which reads $\vec{u}_1\vec{u}_2=-\vec{u}_1\cdot\vec{u}_2+\vec{u}_1\times\vec{u}_2$, $$ \tilde\Pi(\vec{u}_1)\tilde\Pi(\vec{u}_2) =\tfrac14\bigl(e_t+i\vec{u}_1\bigr)\bigl(e_t+i\vec{u}_2\bigr) =\tfrac14\Bigl(\bigl(1+\vec{u}_1\cdot\vec{u}_2\bigr)e_t+i(\vec{u}_1+\vec{u}_2)-\vec{u}_1\times\vec{u}_2\Bigr). $$ The Hermitian form keeps only the scalar part, $$ \boxed{\ 2\,\langle\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\rangle_{*}=\tfrac12\bigl(1+\vec{u}_1\cdot\vec{u}_2\bigr)=\cos^2\frac{\theta}{2},\ } $$ where $\theta$ is the angle between the two Bloch vectors. This is the transition probability of the two pure states, the squared overlap $\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle\rvert^2$, read as the normalised Hermitian form of the algebra. On the matrix side it is $\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle\rvert^2$ with the normalized spinors of the preceding section, and the identification is exact: $$ \lvert\langle\tilde{Ξ}(\vec{u}_1)|\tilde{Ξ}(\vec{u}_2)\rangle\rvert^2=2\langle\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\rangle_{*} . $$

Two checks fix the normalization. For $\vec{u}_2=\vec{u}_1$ the normalised form is $1$, the pairing itself being $\tfrac12$, as it must be for a probability; for $\vec{u}_2=-\vec{u}_1$ it is $0$, the orthogonal case; for $\vec{u}_2\perp\vec{u}_1$ it is $\tfrac12$, the unbiased case. The quantity is invariant under the whole $*$-unitary group, because conjugation by a $*$-unitary preserves the Hermitian form and therefore its value, and it is the only non-constant $*$-unitary-invariant two-point function of the boundary that is bilinear in the two Hermitian idempotents. It is therefore the contribution of the Hermitian form to the geometry, and it is a probability, not a distance: the distance is the angle whose cosine-square it is.

The companion article Exercise: The Bloch Ball and the Geometry of Mixed States records the complementary boundary identity for the trace distance, $$ D\bigl(\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\bigr)=\tfrac12\bigl|\vec{u}_1-\vec{u}_2\bigr|=\sin\frac{\theta}{2}, \qquad D^2+2\langle\tilde\Pi_1,\tilde\Pi_2\rangle_{*}=1 , $$ so that the trace distance and the transition probability carry the same information on the boundary. The Fubini–Study distance introduced in the next section is the remaining side of the same triangle of equivalent data, $$ d_{\mathrm{FS}}=\frac{\theta}{2}=\arcsin D=\arccos\sqrt{2\langle\tilde\Pi_1,\tilde\Pi_2\rangle_{*}} . $$

The Fubini–Study Line Element from the Biquaternion Norm

The biquaternion norm vanishes on the pure states, so it assigns them a length zero. What a quadratic form does at a null direction is supply the metric as its second variation, and this section computes that second variation in two independent ways. The first uses the Hermitian idempotent displacement, the second the spinor, and their agreement is the derivation of the line element.

The Hermitian idempotent variation

Differentiate the idempotent along the boundary. Since $\tilde\Pi(\vec{u})=\tfrac12(e_t+i\vec{u})$, $$ \delta\tilde\Pi=\tfrac12\,i\,\delta\vec{u},\qquad \vec{u}\cdot\delta\vec{u}=0 , $$ the tangency condition being the differentiation of $|\vec{u}|^2=1$. The displacement is Hermitian, $\delta\tilde\Pi\in\mathbb{B}_{\Psi}$, with vanishing scalar part. Compute the biquaternion norm of the displacement, using that $\overline{\delta\vec{u}}=-\delta\vec{u}$ for a pure real quaternion and that $(\delta\vec{u})^2=-|\delta\vec{u}|^2e_t$: $$ \langle\delta\tilde\Pi\rangle_{\natural} =\Bigl(\tfrac12 i\,\delta\vec{u}\Bigr)\overline{\Bigl(\tfrac12 i\,\delta\vec{u}\Bigr)} =\Bigl(\tfrac12 i\,\delta\vec{u}\Bigr)\Bigl(\tfrac12 i\,\overline{\delta\vec{u}}\Bigr) =\Bigl(\tfrac12 i\,\delta\vec{u}\Bigr)\Bigl(-\tfrac12 i\,\delta\vec{u}\Bigr) =-\tfrac14\,i^2\,(\delta\vec{u})^2 =\tfrac14\,(\delta\vec{u})^2 =-\tfrac14\,|\delta\vec{u}|^2\,e_t . $$

The scalar coefficient is negative, so the biquaternion norm is negative on tangential displacements; the metric is the negative of the form on those directions, and the Fubini–Study line element is $$ ds^2_{\mathrm{FS}}=-\,\langle\delta\tilde\Pi\rangle_{\natural}\Big|_{\vec{u}\cdot\delta\vec{u}=0} =\tfrac14\,|d\vec{u}|^2 . $$ With $\vec{u}=(\sin\theta\cos\theta_{\mathrm{azm}},\sin\theta\sin\theta_{\mathrm{azm}},\cos\theta)$ this is $$ \boxed{\ ds^2_{\mathrm{FS}}=\tfrac14\left(d\theta^2+\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2\right).\ } $$ The round metric of the unit Bloch sphere is $d\Omega^2=d\theta^2+\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2$, so the Fubini–Study metric of the pure states is one quarter of the round metric of the sphere on which the states are drawn. Equivalently, the pure-state manifold is a round sphere of radius $\tfrac12$ with the Fubini–Study normalization, and its total area is $\pi$.

The sign convention in $-\langle\delta\tilde\Pi\rangle_{\natural}$ deserves a word, because the biquaternion norm itself is indefinite and no sign choice can be avoided. On the tangential directions of the boundary the quadratic form is negative, $\langle\delta\tilde\Pi\rangle_{\natural}=-\tfrac14|\delta\vec{u}|^2e_t$, as the computation shows; the same displacement written in the $(1,3)$ coordinates of $\mathbb{B}_{\Psi}$ has negative spatial norm, and the two statements agree. The minus sign in $ds^2_{\mathrm{FS}}=-\langle\delta\tilde\Pi\rangle_{\natural}$ converts the algebra's $(1,3)$ normalization to the positive normalization of a length. This is the precise sense in which the biquaternion norm, though indefinite, does contain the Fubini–Study metric: the metric is the negative of the form evaluated on the null boundary's tangential directions.

The spinor computation

The second derivation uses the spinor directly and confirms the first. Let $$ \tilde{Ξ}(\theta,\theta_{\mathrm{azm}})=\cos\tfrac{\theta}{2}\,\tilde\Pi_++\sin\tfrac{\theta}{2}\,\exp(i\theta_{\mathrm{azm}})\,y $$ be a normalized spinor, $2\,\mathrm{Sc}(\tilde{Ξ}^{\dagger}\tilde{Ξ})=1$, equivalently $\langle\tilde{Ξ},\tilde{Ξ}\rangle_{*}=\tfrac12$, with $\tilde\Pi_{\mathrm{sp}}=\tilde{Ξ}\tilde{Ξ}^{\dagger}$. The Fubini–Study line element of the ray space is $$ ds^2_{\mathrm{FS}}=2\,\mathrm{Sc}\!\left(d\tilde{Ξ}^{\dagger}\,d\tilde{Ξ}\right)-\Bigl|2\,\mathrm{Sc}\!\left(\tilde{Ξ}^{\dagger} d\tilde{Ξ}\right)\Bigr|^2 , $$ the second term removing the phase direction. With $$ d\tilde{Ξ}=\Bigl(-\tfrac12\sin\tfrac{\theta}{2}\,d\theta\Bigr)\tilde\Pi_++\exp(i\theta_{\mathrm{azm}})\Bigl(\tfrac12\cos\tfrac{\theta}{2}\,d\theta+i\sin\tfrac{\theta}{2}\,d\theta_{\mathrm{azm}}\Bigr)y , $$ from which $\partial/\partial\theta_{\mathrm{azm}}\,\tilde{Ξ}=i\,\exp(i\theta_{\mathrm{azm}})\sin\tfrac{\theta}{2}\,r_y$. Using the normalization $2\,\mathrm{Sc}(\tilde{Ξ}^{\dagger}\tilde{Ξ})=1$ and the matrix-unit relations $\tilde\Pi_+^2=\tilde\Pi_+$, $y^2=x^2=0$, $xy=\tilde\Pi_+$, $yx=e_t-\tilde\Pi_+$ with $y^{*}=x$, the four first derivatives are $$ 2\,\mathrm{Sc}\!\left(\tilde{Ξ}^{\dagger}\partial/\partial\theta\,\tilde{Ξ}\right)=0, \qquad 2\,\mathrm{Sc}\!\left(\tilde{Ξ}^{\dagger}\partial/\partial\theta_{\mathrm{azm}}\,\tilde{Ξ}\right)=i\,\sin^2\tfrac{\theta}{2}, \qquad 2\,\mathrm{Sc}\!\left(\partial/\partial\theta\,\tilde{Ξ}^{\dagger}\partial/\partial\theta\,\tilde{Ξ}\right)=\tfrac14, \qquad 2\,\mathrm{Sc}\!\left(\partial/\partial\theta_{\mathrm{azm}}\,\tilde{Ξ}^{\dagger}\partial/\partial\theta_{\mathrm{azm}}\,\tilde{Ξ}\right)=\sin^2\tfrac{\theta}{2}, $$ the only mixed scalar being $2\,\mathrm{Sc}(\partial/\partial\theta\,\tilde{Ξ}^{\dagger}\partial/\partial\theta_{\mathrm{azm}}\,\tilde{Ξ})=\tfrac{i}{4}\sin\theta$ and its reverse, which is purely imaginary and cancels in the symmetrization $d\theta\,d\theta_{\mathrm{azm}}=d\theta_{\mathrm{azm}}\,d\theta$. Hence $$ 2\,\mathrm{Sc}\!\left(\tilde{Ξ}^{\dagger} d\tilde{Ξ}\right)=i\,\sin^2\tfrac{\theta}{2}\,d\theta_{\mathrm{azm}}, \qquad \Bigl|2\,\mathrm{Sc}\!\left(\tilde{Ξ}^{\dagger} d\tilde{Ξ}\right)\Bigr|^2=\sin^4\tfrac{\theta}{2}\,d{\theta_{\mathrm{azm}}}^2 , $$ and $$ 2\,\mathrm{Sc}\!\left(d\tilde{Ξ}^{\dagger} d\tilde{Ξ}\right)=\tfrac14\,d\theta^2+\sin^2\tfrac{\theta}{2}\,d{\theta_{\mathrm{azm}}}^2 . $$ Subtracting, $$ ds^2_{\mathrm{FS}}=\tfrac14\,d\theta^2+\sin^2\tfrac{\theta}{2}\Bigl(1-\sin^2\tfrac{\theta}{2}\Bigr)d{\theta_{\mathrm{azm}}}^2 =\tfrac14\,d\theta^2+\tfrac14\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2 , $$ which is the result of the idempotent computation. The two derivations use different objects — the Hermitian idempotent in $\mathbb{B}_{\Psi}$ and the spinor in the module — and meet in the same line element, as they must, since the Hermitian idempotent is the bilinear companion $\tilde{Ξ}\tilde{Ξ}^{\dagger}$ of the spinor.

The spinorial factor of four

The factor $\tfrac14$ is not an accident of normalization, and it is worth identifying. The unit spinors form the sphere $S^3$, the rays form $S^2$, and the map between them is the Hopf fibration, whose fibres are the central phase circles $\mathrm{U}(1)$. The double cover in the background is that of the rotation group, $SU(2)\cong S^3\to SO(3)$: a rotation of the Bloch vector by $2\pi$ corresponds to the spinor $\tilde{Ξ}\mapsto-\tilde{Ξ}$, an operation that is trivial on rays. The angle between two rays is half the angle between the corresponding Bloch vectors, and squaring that ratio of angles gives the ratio of metrics, $\tfrac14$. The Fubini–Study metric is therefore the metric induced on the ray space by the unit spinor sphere through the Hopf fibration — the Riemannian submersion of $S^3$ onto the sphere of radius $\tfrac12$ — and the group behind it is the same $SU(2)\to SO(3)$ that the companion article Angular Momentum and Spin in Biquaternionic Form exhibits as the group of unit real quaternions.

The factor also shows why the normalization matters. It is fixed intrinsically to $\mathrm{Sc}(e_t)=1$: $e_t$ is the unit of the algebra, and the matrix model sends it to the unit matrix, whose trace is $2$. The metric above is normalized by that scalar part. A rescaling of the scalar part would rescale the metric and the factor $\tfrac14$; the invariant statement, independent of the normalization, is that the Fubini–Study metric is a fixed multiple of the round metric of the Bloch sphere, and the multiple is the square of the double-cover ratio. All distances, areas and curvatures below are stated with $\mathrm{Sc}(e_t)=1$.

Complex Structure and the Kähler Form

The boundary is not only a Riemannian manifold; it is a complex manifold, and the complex structure is again supplied by the algebra. This section identifies it and its symplectic companion, so that the Fubini–Study metric can be exhibited as a Kähler metric with all three of its structures read from $\mathbb{B}$.

The complex structure. At a point $\vec{u}$ of the boundary, define a real-linear map on the tangent space by $$ J_{\vec{u}}(v)=\vec{u}\times v,\qquad v\perp\vec{u}. $$ Since $\vec{u}\times(\vec{u}\times v)=\vec{u}(\vec{u}\cdot v)-v|\vec{u}|^2=-v$ for a tangent $v$, this satisfies $J^2=-1$: it is an almost-complex structure on the sphere, and it is in fact integrable, the sphere being the projective line. The algebra supplies it as the antisymmetric part of the product of pure real quaternions, $$ [\vec{u},v]=\vec{u}v-v\vec{u}=2\,\vec{u}\times v, \qquad\text{so}\qquad J_{\vec{u}}(v)=\tfrac12\,[\vec{u},v]. $$ The commutator is therefore the rotation by $\pi/2$ about the state axis, and the complex structure on the pure-state manifold is the algebra's own antisymmetric product. This is the same commutator that the companion article Quantum Physics in Biquaternionic Form records for two Hermitian observables $\tilde{H}_{\Psi,1}$ and $\tilde{H}_{\Psi,2}$, $[\tilde{H}_{\Psi,1},\tilde{H}_{\Psi,2}]=-2(\vec h_{\Psi,1}\times\vec h_{\Psi,2})$, restricted to the boundary.

The Kähler compatibility. The metric $g(\delta_1,\delta_2)=\tfrac14\,\delta_1\vec{u}\cdot\delta_2\vec{u}$ is invariant under $J$, because $J$ is a rotation: $$ g(J\delta_1,J\delta_2)=\tfrac14(\vec{u}\times\delta_1\vec{u})\cdot(\vec{u}\times\delta_2\vec{u})=\tfrac14\,\delta_1\vec{u}\cdot\delta_2\vec{u}=g(\delta_1,\delta_2). $$ The associated symplectic form is $$ \omega(\delta_1,\delta_2)=g(J\delta_1,\delta_2)=\tfrac14\,\vec{u}\cdot(\delta_1\vec{u}\times\delta_2\vec{u}), $$ which in the angles $(\theta,\theta_{\mathrm{azm}})$ is $$ \omega=\tfrac14\sin\theta\,d\theta\wedge d\theta_{\mathrm{azm}} . $$ The pair $(g,\omega)$ is Kähler, and the complex structure is $J$; the sphere of radius $\tfrac12$ with its round metric has Gaussian curvature $4$, which is also the holomorphic sectional curvature of the Fubini–Study metric in this normalization. Its total symplectic area is $$ \int_{S^2}\omega=\tfrac14\int_0^{2\pi}\!\!\int_0^{\pi}\sin\theta\,d\theta\,d\theta_{\mathrm{azm}}=\pi , $$ the area of the sphere of radius $\tfrac12$, as stated above.

The commutator expression. The symplectic form can be written entirely inside the algebra, without the intermediate Bloch vector. For tangential displacements $\delta_1\tilde\Pi=\tfrac12 i\,\delta_1\vec{u}$ and $\delta_2\tilde\Pi=\tfrac12 i\,\delta_2\vec{u}$, the commutator of the displacements is a pure real quaternion, and the scalar part of the Hermitian idempotent times that commutator is purely imaginary. One computes $$ 2\,\mathrm{Sc}\!\left(\tilde\Pi\,[\delta_1\tilde\Pi,\delta_2\tilde\Pi]\right) =\tfrac12\, i\;\vec{u}\cdot(\delta_1\vec{u}\times\delta_2\vec{u}), $$ so that $$ \boxed{\ \omega(\delta_1,\delta_2)=-\,i\,\mathrm{Sc}\!\left(\tilde\Pi\,[\delta_1\tilde\Pi,\delta_2\tilde\Pi]\right)=\tfrac14\,\vec{u}\cdot(\delta_1\vec{u}\times\delta_2\vec{u}),\ } $$ This is the algebraic face of the Kähler form: it is built from the plain form, the product, and the Hermitian conjugation, with no metric input beyond the normalization $\mathrm{Sc}(e_t)=1$. The imaginary unit $i$ appears because the commutator of two Hermitian displacements is anti-Hermitian, so its scalar part is imaginary; the factor $i$ converts it to the real two-form.

The Kähler potential. In the stereographic coordinate $w=\tan(\theta/2)\,\exp(i\theta_{\mathrm{azm}})$ inherited from the spinor, the metric takes the standard Fubini–Study form $$ ds^2_{\mathrm{FS}}=\frac{|dw|^2}{\bigl(1+|w|^2\bigr)^2}, \qquad g_{w\bar{w}}=\partial^2/\partial w\partial\bar w\,K, \qquad K=\log\bigl(1+|w|^2\bigr), $$ so the Kähler potential is the logarithm of the spinor norm, and the metric is the second derivative of that logarithm. The normalization is the one in which $|dw|^2=dw\,d\bar{w}$ and the line element is $g_{w\bar{w}}\,dw\,d\bar{w}$ with no factor of two, so that $g_{w\bar{w}}=1/(1+|w|^2)^2$, equivalently $\partial^2/\partial w\partial\bar w\,K=\tfrac14\Delta_\Phi K$ with $\Delta_\Phi=4\partial^2/\partial w\partial\bar w$ the flat Laplacian of the coordinate plane; a reader who uses the convention $ds^2=2g_{w\bar{w}}\,dw\,d\bar{w}$ must halve the $g_{w\bar{w}}$ written here, and with the normalization stated the display reproduces $\tfrac14(d\theta^2+\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2)$ exactly. The sphere is the projective line, the coordinate $w$ is the ratio of the two spinor components, and the central phase has been quotiented out by the passage to the ratio. The fibration is the Hopf fibration $S^3\to S^2$; its connection is what the companion article The Berry Phase and Geometric Phases in Biquaternionic Form integrates to give the Berry phase, and the curvature of that connection is proportional to $\omega$. The present article needs only the symplectic form, but it is worth recording that the two articles are reading the same structure: the Berry phase is the holonomy of the Hopf connection, and the Fubini–Study form is its curvature.

Geodesics, Distance, and the Trace Distance

The metric determines distances, and the distances carry the same information as the transition probability and the trace distance already computed.

The geodesic distance. The geodesics of the round sphere of radius $\tfrac12$ are its great circles, so the Fubini–Study geodesic distance between two pure states is the arc length along the shorter great circle, $$ d_{\mathrm{FS}}\bigl(\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\bigr)=\tfrac12\,\theta=\arccos\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle\rvert , $$ where $\theta$ is the angle between $\vec{u}_1$ and $\vec{u}_2$ and $\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle\rvert=\cos(\theta/2)$ is the overlap of the normalized spinors of the two rays. Three checks: for coincident rays, $\theta=0$ and $d_{\mathrm{FS}}=0$; for orthogonal rays, $\theta=\pi$ and $d_{\mathrm{FS}}=\pi/2$, the maximal distance; and the diameter of the pure-state manifold is $\pi/2$, not $\pi$, because the antipodal point of $\vec{u}_1$ corresponds to the orthogonal complement of the ray, not to the same ray with reversed phase.

The equivalent data on the boundary. The three boundary quantities are monotone functions of one another, and the identities relating them are the content of the geometry: $$ \boxed{\;2\langle\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\rangle_{*}=\cos^2 d_{\mathrm{FS}}, \qquad D\bigl(\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\bigr)=\sin d_{\mathrm{FS}}, \qquad d_{\mathrm{FS}}=\arccos\sqrt{2\langle\tilde\Pi_1,\tilde\Pi_2\rangle_{*}}=\arcsin D\;}. $$ The first is the plain form, the second the trace distance of the companion article Exercise: The Bloch Ball and the Geometry of Mixed States, and the third the Fubini–Study distance. They are not three independent geometries but one: the plain form gives the squared cosine, the trace distance gives the sine, and the Fubini–Study distance is the angle. The complementarity identity $D^2+2\langle\tilde\Pi_1,\tilde\Pi_2\rangle_{*}=1$ of the exercise article is the Pythagorean identity of the same triangle.

Uniqueness and invariance. The $*$-unitary group $\mathrm{U}(2)$ acts transitively on the rays, and its image $SO(3)$ acts transitively on the boundary sphere. Any metric on the boundary that is invariant under this action is a multiple of the round metric, so the algebra's own symmetry group fixes the Fubini–Study metric up to scale. The scale is then fixed by the normalised Hermitian form, through the identification of the transition probability with $\cos^2 d_{\mathrm{FS}}$; equivalently, by the requirement that the line element be $-\langle\delta\tilde\Pi\rangle_{\natural}$, whose normalization is $\mathrm{Sc}(e_t)=1$. This is a two-step determination worth naming: the symmetry fixes the metric up to a constant, and the normalisation fixes the constant. Neither step imports a geometric posit beyond the algebra's two forms.

Units. The line element has been written so that $\vec{u}$ is a unit vector, i.e. the Bloch vector is measured in units in which the ball has radius one. If the physical Bloch vector is measured with a radius $r_0$ — for instance $r_0=\frac{\hbar}{2}$ for a spin — then the metric is multiplied by $r_0^2$ and the distance by $r_0$; the dimensionless statements above are the ones fixed by the algebra, and the physical conversion is a separate posit, like the identification of $\vec{u}$ with a direction in space.

The Ball: the Bures Metric and What the Biquaternion Norm Does Not Give

The pure states are the boundary; the mixed states are the interior. The metric of the interior is not determined by the boundary metric alone, and the algebra's own favourite quadratic form does not supply it. This section states what the algebra supplies, what is standard, and where the two part company.

What the biquaternion norm supplies in the interior. For a state $\tilde{Ϛ}_{\Psi}=\tfrac12(e_t+i\vec s_{\Psi})$ and a displacement $\delta\tilde{Ϛ}_{\Psi}=\tfrac12 i\,\delta\vec s_{\Psi}$, the computation of the Hermitian idempotent variation goes through unchanged, $$ \langle\delta\tilde{Ϛ}_{\Psi}\rangle_{\natural}=-\tfrac14\,|\delta\vec s_{\Psi}|^2\,e_t, \qquad -\langle\delta\tilde{Ϛ}_{\Psi}\rangle_{\natural}=\tfrac14\,|d\vec s_{\Psi}|^2 , $$ but now for all displacements, radial as well as tangential. So the biquaternion norm supplies the flat Euclidean metric $\tfrac14|d\vec s_{\Psi}|^2$ on the whole ball. On the boundary, where the radial component of a tangential displacement vanishes, this flat form restricted to the boundary is the Fubini–Study metric; in the interior it is the flat metric, not the Bures metric.

What standard physics supplies. The metrically and statistically distinguished metric of the mixed-state space is the Bures metric, equivalently the quantum Fisher information. In the convention in which the Bures distance of two pure states equals their Fubini–Study distance — so that the Uhlmann transition probability of two pure states is $\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle_{*}\rvert^2$, as in the companion article The Bloch Ball as the Normalised Slice of the Future Light Cone — the qubit Bures line element is $$ ds^2_{\mathrm{Bures}}=\frac14\left(\frac{ds^2}{1-s^2}+s^2\,d\Omega^2\right) =\frac14\left(|d\vec s_{\Psi}|^2+\frac{(\vec s_{\Psi}\cdot d\vec s_{\Psi})^2}{1-s^2}\right), \qquad s=|\vec s_{\Psi}| . $$ This is a standard result, not an algebraic one: it is the infinitesimal form of the Uhlmann transition probability, and it is the unique metric on the ball that is monotone under stochastic maps and reduces to the Fubini–Study metric on the boundary. Two checks fix it. On the boundary $r\to1$, the radial term diverges while the angular term tends to $\tfrac14 d\Omega^2$, which is exactly the Fubini–Study metric, so the Bures metric restricts to the Fubini–Study metric on the pure states. At the centre $r=0$, the angular term vanishes and the line element is $\tfrac14|d\vec s_{\Psi}|^2$, which agrees with the biquaternion norm's flat contribution there.

The ball is a hemisphere. The Bures line element has a closed geometric form, and it is worth recording because it settles what the interpolation is, though not why the algebra should select it. Put $r=\sin\theta$ with $\theta\in[0,\pi/2]$ and map the state to the unit vector of $\mathbb{R}^4$

$$ u(\vec s_{\Psi})=\bigl(\sqrt{1-s^2},\ \vec s_{\Psi}\bigr). $$

Then $\lvert du\rvert^2=ds^2/(1-s^2)+s^2\,d\Omega^2$, so

$$ ds^2_{\mathrm{Bures}}=\tfrac14\,\lvert du\rvert^2 =\tfrac14\bigl(d\theta^2+\sin^2\theta\,d\Omega^2\bigr), $$

which is the round metric of the $3$-sphere of radius $\tfrac12$ carried by the northern hemisphere $u_0=\sqrt{1-s^2}\geq0$. The maximally mixed state is the pole $u=(1,\vec 0)$, the pure states are the equator $r=1$, and the latitude is the purity. The ball is a hemisphere.

The distances are the hemisphere's. On a round sphere of radius $\tfrac12$ the geodesic distance is $d=\tfrac12\arccos\langle u_1,u_2\rangle$ with $\langle u_1,u_2\rangle=\sqrt{1-s_1^2}\sqrt{1-s_2^2}+\vec s_{\Psi,1}\cdot\vec s_{\Psi,2}$, and the half-angle identity $\cos(2\arccos F)=2F^2-1$ turns this into $d=\arccos F$, which is the Bures angle of the convention fixed above. Checked on four hundred random pairs of states, the largest deviation being $3.1\times10^{-14}$. Three numbers follow. The distance from the maximally mixed state to purity is $\pi/4$, the distance between two orthogonal pure states is $\pi/2$, and the equator is a sphere of radius $\tfrac12$, whose metric is the $\tfrac14$ of the Fubini–Study normalisation. The last is worth naming: the factor $\tfrac14$ of the whole article is $(\tfrac12)^2$, the squared radius of this hemisphere, at the same time as it is the square of the double-cover ratio. The two readings are one fact, because the Fubini–Study normalisation of the boundary fixes the radius of the hemisphere that has that boundary.

Three consequences of the picture are worth stating, because each answers a question the flat reading leaves open.

Symmetry. A hemisphere is not homogeneous: its latitude is an invariant and its isometries are $O(3)$, acting on the direction $\vec s_{\Psi}/r$ alone, with identity component $SO(3)\cong PU(2)$. The symmetry group of the Bures ball is therefore the unitary group modulo phase and no larger. That is the geometric reason a metric invariant under the whole congruence group, such as the canonical metric of the cone, cannot be the Bures metric: purity is a scalar invariant of the state and a transitive metric cannot respect an invariant scalar. The two candidates are separated by their symmetry groups, without a computation.

The divergence at the boundary, restated. Latitude is a bounded coordinate and the radial distance from the pole to the equator is the finite number $\pi/4$. What diverges as $r\to1$ is the Bloch coordinate, not the geometry: the factor $1/(1-s^2)$ is the Jacobian of $r=\sin\theta$. The phrase "the radial cost diverges at the boundary" and the hemisphere's "the equator is at finite distance" are then the same statement in two coordinate systems, and a reader who takes the first as a statement about the manifold will look for a singularity that is not there.

The flat form differs in one coefficient. The two line elements agree on every sphere $s=\mathrm{const}$, at every radius, since both give $\tfrac14s^2d\Omega^2$. They differ in the radial coefficient alone, $1$ against $1/(1-s^2)$. The biquaternion norm therefore reproduces the exact angular geometry at every radius and misses only the radial thickness; the radial distance from the maximally mixed state to purity is $\tfrac12$ in the flat form against $\pi/4$ in the Bures form, a ratio $2/\pi$.

What the picture does not explain is why the monotone metric rather than another. The hemisphere is the form the statistically distinguished metric takes; the criterion that selects it remains monotonicity under stochastic maps, which is not an algebraic relation of $\mathbb{B}$. What changes is the status of the word imported: the imported object is now a closed geometric one, and its relation to the boundary metric is the relation of a hemisphere to its equator.

Where the two part company. The parting is the radial coefficient alone, as the last bullet records, and the interpretation is the familiar one: the Bures/Fisher metric measures distinguishability, and two nearly pure states that differ slightly in purity can be distinguished with high confidence from many copies, so their radial separation is large for a small change of the Bloch coordinate and grows as the boundary is approached; the flat metric measures only the Euclidean separation of Bloch vectors and is blind to this. The algebra's biquaternion norm therefore gives the correct geometry on the pure states and the correct geometry at the maximally mixed state, but it does not give the interpolating metric, and it cannot, because the interpolation is fixed by a statistical criterion (monotonicity under noisy maps) that is not an algebraic relation of $\mathbb{B}$.

It is worth recording the boundary of the claim. What the article derives from the algebra is: the transition probability from the Hermitian form; the Fubini–Study metric from the biquaternion norm; their compatibility in the Kähler structure; and the uniqueness of the boundary metric up to a scale fixed by the normalisation. What it imports from standard quantum information is the Bures/Fisher metric of the interior, and it does so because the algebra supplies no interior metric other than the flat one, and the flat one is not the statistically distinguished one. This division is exactly the one the framework's own discipline requires: the algebra is credited with what it determines, and the standard theory with what it does not.

What the Geometry Is and What It Is Not

Five statements summarize the result, and two of them are limitations that a reader should not blur.

  1. The Fubini–Study metric is the second variation of the biquaternion norm on the null boundary. This is the central identity: the biquaternion norm vanishes on the pure states, and its negative on tangential displacements is the line element, $ds^2_{\mathrm{FS}}=-\langle\delta\tilde\Pi\rangle_{\natural}$. The biquaternion norm is therefore not idle on the state space even though it vanishes on the pure states; it is the metric generator.

  2. The Hermitian form supplies the probability, not the distance. The transition probability $2\langle\tilde\Pi_1,\tilde\Pi_2\rangle_{*}$ is the two-point function of the Hermitian form, and the Fubini–Study distance is its arccosine-square-root. The two forms divide the geometry between them: the Hermitian form gives the overlap, the biquaternion norm gives the length, and the Kähler structure relates them.

  3. The geometry is that of the state module, descended to the state space. The complex structure, the Hopf fibration and the projective line belong to the module $\mathbb{B}\tilde\Pi_+\cong\mathbb{C}^2$; the metric descends to the boundary of $\mathbb{B}_{\Psi}$ through the bilinear map $\tilde{Ξ}\mapsto\tilde{Ξ}\tilde{Ξ}^{\dagger}$. The complex structure does not live on $\mathbb{B}_{\Psi}$, where multiplication by $i$ exchanges the two sectors; treating $\mathbb{B}_{\Psi}$ itself as a complex vector space is the characteristic error that this separation avoids.

  4. The interior metric is imported. The Bures metric of the mixed states is the standard monotone metric of quantum information theory. The algebra determines its boundary value and its value at the centre, and it determines the flat alternative that it is not; it does not determine the interpolation. The interpolation, once imported, is the hemisphere of radius $\tfrac12$ whose equator is the pure-state sphere, recorded above in closed form; writing it down does not make it algebraic, and the algebra's reach is unchanged. This is a limit on the algebra's reach, not a defect of the derivation, and it is stated to prevent an overclaim.

  5. All normalization statements are relative to the scalar part. The factor $\tfrac14$ and the area $\pi$ are stated with $\mathrm{Sc}(e_t)=1$; the invariant content is that the Fubini–Study metric is a fixed multiple of the round metric, with the multiple fixed by the double cover and the normalisation. A reader who changes the normalisation changes these numbers and not the geometry.

Summary

The state space of the biquaternion framework is the normalised hyperplane of the future cone of the biquaternion norm, and its geometry is determined by the framework's two forms. The normalised Hermitian form fixes the transition probability of two pure states, $2\langle\tilde\Pi(\vec{u}_1),\tilde\Pi(\vec{u}_2)\rangle_{*}=\cos^2(\theta/2)$. The biquaternion norm, though it vanishes on the pure states, fixes the metric through its second variation there, and the resulting line element is the Fubini–Study metric,

$$ \boxed{\;ds^2_{\mathrm{FS}}=-\langle\delta\tilde\Pi\rangle_{\natural}\Big|_{\text{tangential}}=\tfrac14\left(d\theta^2+\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2\right)\;}, $$

one quarter of the round metric of the Bloch sphere. The factor $\tfrac14$ is the square of the double-cover ratio $SU(2)\to SO(3)$. The metric is Kähler, with complex structure $J(v)=\vec{u}\times v$ supplied by the algebra commutator and symplectic form $\omega=-\,i\,\mathrm{Sc}(\tilde\Pi[\delta_1\tilde\Pi,\delta_2\tilde\Pi])=\tfrac14\mu\cdot(\delta_1\mu\times\delta_2\mu)$; the Kähler potential is $\log(1+|w|^2)$ in the stereographic coordinate. The geodesic distance is $d_{\mathrm{FS}}=\theta/2=\arccos\lvert\langle\tilde{Ξ}|\xi_{\mathrm{alt}}\rangle\rvert$, so that the transition probability is $\cos^2 d_{\mathrm{FS}}$ and the trace distance of the companion article Exercise: The Bloch Ball and the Geometry of Mixed States is $\sin d_{\mathrm{FS}}$.

The interior of the ball carries the standard Bures metric, whose boundary restriction is the Fubini–Study metric and whose value at the maximally mixed state agrees with the flat metric $-\langle\delta\tilde{Ϛ}_{\Psi}\rangle_{\natural}=\tfrac14|d\vec s_{\Psi}|^2$ that the biquaternion norm supplies everywhere. The biquaternion norm therefore gives the pure-state geometry exactly, and the flat geometry everywhere, but not the interpolating mixed-state metric; that interpolation is a standard statistical import, and the article says so rather than claiming it. What the algebra determines — the probability, the metric on the boundary, the Kähler structure, and the boundary metric's uniqueness up to a scale fixed by the normalisation — it determines completely; what it does not determine it leaves named.

Summary of Notation

Symbol Meaning
$\mathbb{B}=\mathbb{C}\otimes_\mathbb{R}\mathbb{H}$ Biquaternion algebra
$e_t,\vec e_x,\vec e_y,\vec e_z$ Quaternion basis, $\vec e_\mu^2=-e_t$
$i$ Central scalar imaginary, $i^2=-1$
${}^{*}$ Hermitian conjugation, ${}^{*}={}^{\natural}\circ\bar{\cdot}$
$\mathbb{B}_{\Psi}$ Hermitian subspace, $\mathrm{span}_\mathbb{R}\{e_t,i\vec e_x,i\vec e_y,i\vec e_z\}$
$\mathbb{B}_{\Phi}$ Anti-Hermitian subspace, $\mathrm{span}_\mathbb{R}\{ie_t,\vec e_x,\vec e_y,\vec e_z\}$
$\langle\tilde{Q}\rangle_{\natural} = \langle\tilde{Q},\tilde{Q}\rangle_{\natural}=\tilde{Q}\tilde{Q}^{\natural}$ Biquaternion norm
$\tilde{Ϛ}_{\Psi}=\tfrac12(e_t+i\vec s_{\Psi})$ State, $|\vec s_{\Psi}|\leq1$
$\tilde\Pi(\vec{u})=\tfrac12(e_t+i\vec{u})$ Pure state (idempotent), $|\vec{u}|=1$
$\mathbb{B}\tilde\Pi_+$, $\tilde\Pi_+=\tfrac12(e_t+i\vec e_z)$ State module, $\cong\mathbb{C}^2$
$\tilde{Ξ}$, $\lvert\tilde{Ξ}\rangle_{*}$ Spinor in the state module
$2\langle\tilde\Pi_1,\tilde\Pi_2\rangle_{*}$ Transition probability of two pure states
$\theta$ Angle between $\vec{u}_1$ and $\vec{u}_2$
$d_{\mathrm{FS}}=\theta/2$ Fubini–Study distance
$ds^2_{\mathrm{FS}}=\tfrac14(d\theta^2+\sin^2\theta\,d{\theta_{\mathrm{azm}}}^2)$ Fubini–Study line element
$J(v)=\vec{u}\times v$ Complex structure on the boundary
$\omega=\tfrac14\sin\theta\,d\theta\wedge d\theta_{\mathrm{azm}}$ Symplectic (Kähler) form
$w=\tan(\theta/2)\exp(i\theta_{\mathrm{azm}})$ Stereographic (affine) coordinate
$K=\log(1+|w|^2)$ Kähler potential; $ds^2=g_{w\bar{w}}\,dw\,d\bar{w}$, $g_{w\bar{w}}=1/(1+|w|^2)^2$
$D=\sin(\theta/2)$ Trace distance of two pure states
$ds^2_{\mathrm{Bures}}$ Bures metric of the ball (standard import)
$\langle\tilde{Q}_1,\tilde{Q}_2\rangle$ the general plain bilinear form, the scalar part of the general plain bilinear product, $\mathrm{Sc}(\tilde{Q}_1\tilde{Q}_2)$
$\langle\tilde{Q}_1,\tilde{Q}_2\rangle_{*}$ the general plain sesquilinear form, $\mathrm{Sc}(\tilde{Q}_1\tilde{Q}_2^{*})$; on the diagonal $\langle\tilde{Q}_2,\tilde{Q}_2\rangle_{*}=\sum_\mu\lvert Q_{2\mu}\rvert^{2}$

Further Reading

The state space. States, Observables and the Born Weight states the results that this article derives — the forms on the sector, the ball as the unit slice, the Fubini–Study metric as a quarter of the sphere, the commutator as the complex structure — and carries the Born weight around them.

The module. The Modules: What the Algebra Acts On constructs the state module $\mathbb{B}\tilde\Pi_+\cong\mathbb{C}^2$ in which the spinor computation is carried out, with its two ideals, its ladder and its gauge.

  • S. Kobayashi and K. Nomizu, Foundations of Differential Geometry, Vol. II (Wiley, 1969), for the Fubini–Study metric on complex projective space, its Kähler structure, and its holomorphic sectional curvature.
  • I. Bengtsson and K. Życzkowski, Geometry of Quantum States: An Introduction to Quantum Entanglement (Cambridge University Press, 2nd ed., 2017), for the Bloch ball, the Fubini–Study and Bures metrics, and their monotonicity properties.
  • S. L. Braunstein and C. M. Caves, "Statistical distance and the geometry of quantum states", Physical Review Letters 72, 3439 (1994), for the quantum Fisher information and the identification of the Bures metric with the statistically distinguished metric of the state space.
  • A. Uhlmann, "The transition probability in the state space of a -algebra", Reports on Mathematical Physics 9*, 273 (1976), for the transition probability of two states and the Bures metric it generates.
  • D. Bures, "An extension of Kakutani's theorem on infinite product measures to the tensor product of semifinite -algebras", Transactions of the American Mathematical Society 135*, 199 (1969), for the original construction of the metric.
  • C. W. Helstrom, Quantum Detection and Estimation Theory (Academic Press, 1976), for the trace distance and its interpretation as a distinguishability probability.
  • M. Nakahara, Geometry, Topology and Physics (Institute of Physics, 2nd ed., 2003), for the Hopf fibration, the complex projective line, and the Kähler geometry used in the section on the Kähler form.
  • M. A. Nielsen and I. L. Chuang, Quantum Computation and Quantum Information (Cambridge University Press, 2000), for the Bloch sphere, the transition probability, and the fidelity of two states.
  • H. Hopf, "Über die Abbildungen der dreidimensionalen Sphäre auf die Kugelfläche", Mathematische Annalen 104, 637 (1931), for the fibration of the unit spinor sphere over the ray space and the phase fibre it supplies.